LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
K2CM-Q1L | OMRON Motor Protective Relay K2CM-Q1L
OMRON K2CM-Q1L Manual And Instructions
K2CM-Q1L datasheetPDF datasheet
K2CM-Q1L Communications Manual

OMRON K2CM-Q1L Product information and technical parameters:
Brand: OMRON
Name: Motor Protective Relay
Model: K2CM-Q1L
Time specification: Instantaneous type.
Current setting range: 8 to 26 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM.

Digital over current K2CA-H type,
Using the advanced technology of fuzzy inference to make the protection and coordination of digital DCR.
And automatic testing machine, so that the relay test is easy.
By using fuzzy inference, the excitation surge current is reduced.
Improve reliability by monitoring function at any time OMRON K2CM-Q1L.
With 1 sets of three-phase protection.
To save space, save wiring to make contribution K2CM-Q1L
Based on the DIN standard size, small depth is only 88.5mm. Category: incidental cover with under voltage detection function.
Structure: bottom mounting type.
Capacity: 15W.
Output voltage: 24V.
Output current: 0.65A.
Alarm output: -.
Built in OMRON''s original new under voltage detection function of small size,
Also contribute to the miniaturization of the device OMRON K2CM-Q1L.
Built in support for determining the abnormal causes of the new under voltage detection function.
(S8VM- - P - 24A - racy type)
Power failure detection function with built-in hint output voltage abnormity.
(type 300/600/1500W)
A total of 8 kinds of capacity of 29 models, a complete range of products.
Meet RoHS instructions including lead free OMRON K2CM-Q1L.
Humanized design of anti - shedding screw for terminal stage.
(except for the 300/600/1500W output terminals)
Support finger touch protection to prevent electric shock.
DIN guide rail simple installation.
Safety standards: CSA, C22.2 No.14/No.60950-1 UL508/60950-1,
EN50178, EN60950-1.
(300/600/1500W type, safety standard is not applicable when the fan is replaced by the customer.)
Meet F47-0200 SEMI standards. (200V input)
High harmonic current limit: EN61000-3-2. (except for type 15/30W)
"

Cable type: Standard Cables.
Typpe: Cable with Plugs on Both Ends (M12 Straight/M12 Straight) K2CM-Q1L.
Cable length: 1 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.6a .
CCable sheath material: LSZH K2CM-Q1L.
Cable color: Green.
Cable lengt: 1.5 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks.


...More relevant models >>>>
Last one: OMRON K2CM-Q2LSA
next one: OMRON K2CM-Q2L