LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
K3HB-CNB-A-DRT1 AC100-240 | OMRON Cumulative / increase / decrease pulse meter K3HB-CNB-A-DRT1 AC100-240
OMRON K3HB-CNB-A-DRT1 AC100-240 Manual And Instructions
K3HB-CNB-A-DRT1 AC100-240 datasheetPDF datasheet

OMRON K3HB-CNB-A-DRT1 AC100-240 Product information and technical parameters:
Brand: OMRON
Name: Cumulative / increase / decrease pulse meter
Model: K3HB-CNB-A-DRT1 AC100-240
Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (HOLD, RESET, COMPENSATION) is equipped with.
External power supply DC12V80mA.
DeviceNet; DeviceNet:--.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
High speed pulse.
Measuring, increasing or decreasing pulse meter.
Action determine the color, can switch the green / Red 2 kinds of color display.
The best choice of rotating encoder and all kinds of ON/OFF pulse signal at high speed,
Cumulative pulse input is 50kHz, phase difference pulse is 25kHz, increase or decrease of pulse is 30kHz.
Support for non voltage contact input

Supply voltage: 12 to 24 VDC.
6-digit total counter: Black.
DIN 48 x 24-mm Total Counter/Time Counter,
with Easy-to-read Displays and Water and,
Oil Resistance Equivalent to IP66.
High-visibility, negative transmissive LCD display with 8.5-mmhigh characters and, built-in red LED backlight at low power OMRON K3HB-CNB-A-DRT1 AC100-240.
consumption.
IP66 with oil resistance and NEMA 4 protection achieved by,
unifying the front with the case and by using oil-resistant parts,
and materials K3HB-CNB-A-DRT1 AC100-240
Compact (80 mm) body.
Just change a switch setting for either an NPN or PNP input.
Supports both external resetting and manual resetting.
Finger-protection terminal block cover prevents electrical shock,
and conforms to VDE0106, Part 100 OMRON K3HB-CNB-A-DRT1 AC100-240.
Certified for UL and CSA safety standards.
Complies with EMC standards (EN 61326) and CE Marking. Solid-state Timer with Single Time Range.
and Operating Mode.
Time range: H3BA-X8HA (0.05 s to 12 h),
H3BA-X8HB (0.3 s to 30 h),
H3BA-X8HC (0.6 s to 60 h).
Operating mode: ON-delay only.
Pin type: 8-pin only. Operation/resetting system: Time-limit operation/self-resetting.
Time-limit contact: 4PDT OMRON K3HB-CNB-A-DRT1 AC100-240.
Time ranges: 0.04 s to 3 h.
Supply voltage: 24, 100 to 120, 200 to 230, 240 VAC (50/60 Hz);
12, 24, 48, 125, 100 to 110 VDC.
Mounting: Surface mounting (with PCB terminals).
Miniature Timer Compatible with the MY Relay.
Semi-multi power supply voltage.
Large transparent time setting knob facilitates time setting.
A flat-blade and Phillips screwdriver can also be used for time setting.
Pin configuration compatible with MY Power Relay.
LED indication for power and output statuses.
Conforms to EMC standards.
Conforms to EN 61812-1 and approved by UL and CSA. Output: DPDDT K3HB-CNB-A-DRT1 AC100-240.
Supply voltage: 110 VAC (50/60 Hz); 220 VAC (50/60 Hz).
Timer: S-series; M-series.
Long power OFF-delay times;
S-series: up to 12 seconds,
M-series: up to 12 minutes.
Setting rings (order separately) to enable connsistent,
settings and to limit the setting range K3HB-CNB-A-DRT1 AC100-240.
Panel Covers (order separately) to enable various panel designs.
Approved by UL, CSA, CE and CCC.


...More relevant models >>>>