LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
K3HB-CNB-L1AT11 AC100-240 | OMRON Cumulative / increase / decrease pulse meter K3HB-CNB-L1AT11 AC100-240
OMRON K3HB-CNB-L1AT11 AC100-240 Manual And Instructions
K3HB-CNB-L1AT11 AC100-240 datasheetPDF datasheet

OMRON K3HB-CNB-L1AT11 AC100-240 Product information and technical parameters:
Brand: OMRON
Name: Cumulative / increase / decrease pulse meter
Model: K3HB-CNB-L1AT11 AC100-240
Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (HOLD, RESET, COMPENSATION) is equipped with.
External power supply DC12V80mA.
Linear: current; NPN open collector (OUT5, OUT4, OUT3, OUT2, OUT1).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
High speed pulse.
Measuring, increasing or decreasing pulse meter.
Action determine the color, can switch the green / Red 2 kinds of color display.
The best choice of rotating encoder and all kinds of ON/OFF pulse signal at high speed,
Cumulative pulse input is 50kHz, phase difference pulse is 25kHz, increase or decrease pulse

Output: Time-limit contact and instantaneous contact.
Supply voltage: 100 to 240 VAC (50/60 Hz)/100 to 125 VDC;
24 to 48 VAC (50/60 Hz)/12 to 48 VDC.
Input type: No-input available.
Time range: 0.05 s to 300 h.
Operating mode(See note 2): Five multi-modes: A, B,B2, E, J (Power supply start).
Output: Transistor(Photocoupler) OMRON K3HB-CNB-L1AT11 AC100-240.
Supply voltage: 24 to 48 VAC (50/60 Hz)/12 to 48 VDC K3HB-CNB-L1AT11 AC100-240
Input type: No-voltage input.
Time range: 0.05 s to 300 h.
Operating mode (See note 2): Eight multi-modes: A, B, B2, C, D, E, G, J.
Multiple Operating Modes and Multiple Time.
Ranges. DIN 48 x 48-mm Multifunctional Timer.
A wide AC/DC power supply range greatly reduces the number,
of timer models kept in stock OMRON K3HB-CNB-L1AT11 AC100-240.
A wide range of applications with multiple operating modes,
eight modes for 11-pin models and five modes for 8-pin models.
Ecological design with reduced current consumption.
Easy sequence checking with instantaneous outputs for a zero set value.
Length of 75 mm or less when panel-mounted with a P3G-08,
Socket (H3CR-A8E, 100 to 240 VAC, 100 to 125 VDC),
PNP input models available OMRON K3HB-CNB-L1AT11 AC100-240.
Standards: UL, CSA, NK, LR, CCC, EN 61812-1, and CE Marking. Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (HOLD, RESET, COMPENSATION) is equipped with.
External power supply DC12V80mA.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
High speed pulse.
Measuring, increasing or decreasing pulse meter.
Action determine the color, can switch the green / Red 2 kinds of color display.
The best choice of rotating encoder and all kinds of ON/OFF pulse signal at high speed,
Cumulative pulse input is 50kHz, phase difference pulse is 25kHz, increase or decrease of pulse is 30kHz.
Supports no voltage contact input to 30Hz.
The count value can be converted to any valueType of input: AC current input.
Output type: linear; voltage; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suuitable voltage and current signal simulation, measurement and display, identification of the panel table K3HB-CNB-L1AT11 AC100-240.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gaauge for monitoring the operation trend K3HB-CNB-L1AT11 AC100-240.
External event input can be applied to a variety of measurement and identification situations.
DeviceNet type


...More relevant models >>>>