LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
K3HB-VLC-CPBC21 AC100-240 | OMRON Load sensor, mV instrument K3HB-VLC-CPBC21 AC100-240
OMRON K3HB-VLC-CPBC21 AC100-240 Manual And Instructions
K3HB-VLC-CPBC21 AC100-240 datasheetPDF datasheet

OMRON K3HB-VLC-CPBC21 AC100-240 Product information and technical parameters:
Brand: OMRON
Name: Load sensor, mV instrument
Model: K3HB-VLC-CPBC21 AC100-240
Category: external supply 100mA DC10V.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Relay contact: HH; PASS1c, H, L, LL: each 1a.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of

Input type: DC voltage input type.
Output type: no output.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) some models are not equipped with depth.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table OMRON K3HB-VLC-CPBC21 AC100-240 K3HB-VLC-CPBC21 AC100-240
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type.
The depth (panel below) is only short size 95mm OMRON K3HB-VLC-CPBC21 AC100-240. Control mode: Sunshine mode / timer mode.
Outage compensation: there.
Power supply voltage: AC100 ~ 200V.
Installation method: DIN guide rail / protocol / surface mount.
Control output: 1C * 1 circuit.
Daylight control time switch.
Rotary device with a display unit, which is always capable of reading from the front.
Accord with JIS protocol size.
There is no need to adjust the time of sunrise and sunset in support of daylight saving time when the seasons change OMRON K3HB-VLC-CPBC21 AC100-240.
5 modes of operation. (4 kinds of Sunshine Action)
With automatic reset function, to prevent misuse. Input type: DC voltage input type.
Output type: DeviceNet; -; DeviceNet.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type.
Supply voltage: 12 to 24 VDC.
6-digit time counter: Light gray.
DIN 48 x 24-mm Total Counter/Time Counter,
with Easy-to-read Displays and Water and,
Oil Resistance Equivalent to IP66.
High-visibility, negative transmissive LCD display with 8.5-mmhigh characters and, built-in red LED backlight at low power.
consumption.
IP66 with oil resistance and NEMA 4 protection achieved by,
unifying the front with the case and by using oil-resiistant parts,
and materials K3HB-VLC-CPBC21 AC100-240.
Compact (80 mm) body.
Just change a switch setting for either an NPN or PNP input.
Supports both external resetting and manual resetting.
Finger-protection terminal block cover prevents eleectrical shock,
and conforms to VDE0106, Part 100 K3HB-VLC-CPBC21 AC100-240.
Certified for UL and CSA safety standards.
Complies with EMC standards (EN 61326) and CE Marking.


...More relevant models >>>>