LK Automation Limited
Brand:
OMRON
K3HB-VLC-E-DRT1 AC/DC24 | OMRON Load sensor, mV instrument K3HB-VLC-E-DRT1 AC/DC24
OMRON K3HB-VLC-E-DRT1 AC/DC24 Manual And Instructions
K3HB-VLC-E-DRT1 AC/DC24 datasheetPDF datasheet
OMRON K3HB-VLC-E-DRT1 AC/DC24 Product information and technical parameters：
Brand: OMRON
Name: Load sensor, mV instrument
Model: K3HB-VLC-E-DRT1 AC/DC24
Category: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
DeviceNet; DeviceNet:--.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification
...More relevant models >>>>
K3HB-VLC-E-DRT1 AC/DC24 datasheetPDF datasheet
OMRON K3HB-VLC-E-DRT1 AC/DC24 Product information and technical parameters：
Brand: OMRON
Name: Load sensor, mV instrument
Model: K3HB-VLC-E-DRT1 AC/DC24
Category: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
DeviceNet; DeviceNet:--.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification
Input type: PNP input type.
Event input terminal 5 points (HOLD, RESET) equipped with.
External power supply DC12V80mA.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
Communication: RS-485; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V OMRON K3HB-VLC-E-DRT1 AC/DC24.
Measurement of 2 points through the speed, time, or cycle of the digital time interval table K3HB-VLC-E-DRT1 AC/DC24
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of wide range of pulse interval time.
Measuring, calculating and displaying the pulse interval between 2 points.
Pulse interval measurement range, the maximum can be measured from 11/32 DIN Digital Panel Meter for Downsizing OMRON K3HB-VLC-E-DRT1 AC/DC24.
Equipment and Control Panels.
Compact size: 48 x 24 x 82 (W x H x D).
Multi-input compatible: DC voltage/current, rotary pulse.
Two display colors (switchable): green/red.
Selectable outputs.
CE marking and UL/CSA approval.
Splash-proof construction (NEMA4X: equivalent to IP66). Type of input: AC voltage input.
Output type: linear; current; NPN open collector (HH, H, PASS, L, LL) OMRON K3HB-VLC-E-DRT1 AC/DC24.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
DeviceNeInput type: NPN/ voltage pulse input type.
Event input terminal 5 points (HOLD, RESET, COMPENSATION) is equipped with.
External power supply DC12V80mA.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
High speed pulse.
Measuring, increasing or decreasing pulse meter K3HB-VLC-E-DRT1 AC/DC24.
Action determine the color, can switch the green / Red 2 kinds of color display.
The best choice of rotating encoder and all kinds of ON/OFF pulse signal at high speed,
Cumulative pulse input is 50kHz, phase differrence pulse is 25kHz, increase or decrease of pulse is 30kHz K3HB-VLC-E-DRT1 AC/DC24.
Supports no voltage contact input to 30Hz.
The count value can be converted to any value
Event input terminal 5 points (HOLD, RESET) equipped with.
External power supply DC12V80mA.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
Communication: RS-485; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V OMRON K3HB-VLC-E-DRT1 AC/DC24.
Measurement of 2 points through the speed, time, or cycle of the digital time interval table K3HB-VLC-E-DRT1 AC/DC24
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of wide range of pulse interval time.
Measuring, calculating and displaying the pulse interval between 2 points.
Pulse interval measurement range, the maximum can be measured from 11/32 DIN Digital Panel Meter for Downsizing OMRON K3HB-VLC-E-DRT1 AC/DC24.
Equipment and Control Panels.
Compact size: 48 x 24 x 82 (W x H x D).
Multi-input compatible: DC voltage/current, rotary pulse.
Two display colors (switchable): green/red.
Selectable outputs.
CE marking and UL/CSA approval.
Splash-proof construction (NEMA4X: equivalent to IP66). Type of input: AC voltage input.
Output type: linear; current; NPN open collector (HH, H, PASS, L, LL) OMRON K3HB-VLC-E-DRT1 AC/DC24.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
DeviceNeInput type: NPN/ voltage pulse input type.
Event input terminal 5 points (HOLD, RESET, COMPENSATION) is equipped with.
External power supply DC12V80mA.
No output: -.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
High speed pulse.
Measuring, increasing or decreasing pulse meter K3HB-VLC-E-DRT1 AC/DC24.
Action determine the color, can switch the green / Red 2 kinds of color display.
The best choice of rotating encoder and all kinds of ON/OFF pulse signal at high speed,
Cumulative pulse input is 50kHz, phase differrence pulse is 25kHz, increase or decrease of pulse is 30kHz K3HB-VLC-E-DRT1 AC/DC24.
Supports no voltage contact input to 30Hz.
The count value can be converted to any value
...More relevant models >>>>