LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
K3HB-VLC-L1BT11 AC/DC24V | OMRON Load sensor, mV instrument K3HB-VLC-L1BT11 AC/DC24V
OMRON K3HB-VLC-L1BT11 AC/DC24V Manual And Instructions
K3HB-VLC-L1BT11 AC/DC24V datasheetPDF datasheet

OMRON K3HB-VLC-L1BT11 AC/DC24V Product information and technical parameters:
Brand: OMRON
Name: Load sensor, mV instrument
Model: K3HB-VLC-L1BT11 AC/DC24V
Category: external supply 100mA DC10V.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Linear: current; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to

Micro timer compatible with MY relay.
ON delay function, can accurately control the time.
Large and transparent time setting knob is easy to set up time.
Pin configuration compatible with MY power relay.
Access to UL, CSA and CCC certification in line with EN61812-1 and EMC standards. Operating modes: Flicker OFF start OMRON K3HB-VLC-L1BT11 AC/DC24V.
Supply voltage: 110 VAC (50/60 Hz), 220 VAC (50/60 Hz) K3HB-VLC-L1BT11 AC/DC24V
Independent ON- and OFF-time settings. Furthermore,
combinations of long ON- or OFF-time and,
short OFF- or ON-time settings are possible.
Wide time ranges from 0.05 s to 300 h.
Easy sequence checks through instantaneous,
outputs for a zero set value at any time range.
Approved by UL, CSA, CE and CCC. Operating method: Reversible (selectable with rotary DIP switch) between,
0 and the set value; Incrementing/decrementing A/D (command inputs);
Incrementing/decrementing B/E (individual inputs);
Incrementing/decrementing C/F (phase difference inputs) OMRON K3HB-VLC-L1BT11 AC/DC24V.
Mounting method: Flush mounting.
Operation modes: N, F, C, R, K, P, Q (selectable with rotary DIP switch).
Input signal method (Count and reset inputs): Contact and transistor input, voltage (H and L) OMRON K3HB-VLC-L1BT11 AC/DC24V.
Control output: 1-stage counters: Contact (SPDT) and transistor,
output (H and L output switchable);
2-stage counters: Contact (SPST-NO) and transistor output,
(H and L output switchable).
Set value read: Continuous mode.
Memory backup: No .
Display: Yes (10-mm high 7-segment LED, Up indicator).
Models: 4 digits; 2 stages.
A DIN 72 x 72 mm Best-selling Counter.
Easy setting with thumbwheel switches.
A draw-out construction enables maintenance without rewiring.
Models with 2-, 4-, 6-, or 8-digit displays are also available.
Total Counter models are also Available.
Complies with UL and CSA Marking. Supply voltage: 24 VDC.
Input type: DC voltage, DC current, or NPN input.
Output type: Judgement output, 2 relay contact outputs(SPST-NO);
Data transmission outpput, DC current (0 to 20 mA, 4 to 20 mA) K3HB-VLC-L1BT11 AC/DC24V.
1/32 DIN Digital Panel Meter for Downsizing.
Equipment and Control Panels.
Compact size: 48 x 24 x 82 (W x H x D).
Multi-input compatible: DC voltage/current, rotary pulse.
Two display colors (switchable): green/red K3HB-VLC-L1BT11 AC/DC24V.
Selectable outputs.
CE marking and UL/CSA approval.
Splash-proof construction (NEMA4X: equivalent to IP66).


...More relevant models >>>>