LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
K3HB-VLC-L1ET11 AC100-240 | OMRON Load sensor, mV instrument K3HB-VLC-L1ET11 AC100-240
OMRON K3HB-VLC-L1ET11 AC100-240 Manual And Instructions
K3HB-VLC-L1ET11 AC100-240 datasheetPDF datasheet

OMRON K3HB-VLC-L1ET11 AC100-240 Product information and technical parameters:
Brand: OMRON
Name: Load sensor, mV instrument
Model: K3HB-VLC-L1ET11 AC100-240
Category: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Linear: current; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input

Operating modes: Flicker OFF start.
Supply voltage: 100 to 240 VAC/100 to 125 VDC, 24 to 48 VAC/12 to 48 VDC.
0.05 s to 300 h models: 8-pin models.
DIN 48 × 48-mm Twin Timers.
Wide power supply ranges of High Voltage 100 to 240 VAC/100,
to 125 VDC and Low Voltage 24 to 48 VAC/12 to 48 VDC.
ON- and OFF-times can be set independently and so,
combinations of long ON- or OFF-time and short OFF- or ON,
time settings are possible OMRON K3HB-VLC-L1ET11 AC100-240 K3HB-VLC-L1ET11 AC100-240
Twenty-four time ranges from 0.05 s to 300 h depending on the,
model to be used.
Models with a flicker ON start or flicker OFF start are available.
Easy sequence checks through instantaneous outputs for a,
zero set value at any time range.
Length, when panel-mounted with a Socket, of 80 mm or less OMRON K3HB-VLC-L1ET11 AC100-240.
11-pin and 8-pin models are available. Operating modes: Flicker OFF start.
Supply voltage: 110 VAC (50/60 Hz), 220 VAC (50/60 Hz).
Independent ON- and OFF-time settings. Furthermore,
combinations of long ON- or OFF-time and,
short OFF- or ON-time settings are possible.
Wide time ranges from 0.05 s to 300 h.
Easy sequence checks through instantaneous,
outputs for a zero set value at any time range OMRON K3HB-VLC-L1ET11 AC100-240.
Approved by UL, CSA, CE and CCC. Linear Sensor Indicator for High-speed, High,
precision Measurement and Discrimination.
Easy recognition of judgement results using color display that can be,
switched between red and green.
Equipped with a position meter that represents measured amounts and,
relative positions.
Develop a variety of measurement and discrimination applications us,
ing external event inputs.
Series expanded to include DeviceNet models.
Short body with depth of only 95 mm (from behind the front panel),
or 97 mm for DeviceNet models.
UL certification approval (Certification Mark License).
CE Marking conformance by third party assessment body.
Water-resistant enclosure conforms to NEMA 4X (equivalent to IP66). Classification: Preset Counter.
Input signal system (Count & reset inputs): Contact, Transistor.
Mounting method: Flush mounting, surface mounting.
Display: 7-segment LEDs (10 mm high), Up indicator.
Number of digits: 4 digits (0 to 9,999).
Backup power for memory protection: No.
Control output: Contact (SPST-NO).
Operating mode: Down counting.
Max.counting speed: 30 cps.
All Required Counter Functions.
Incorporated in a Compact DIN-sized.
(48 × 48) Housing.
In addition to Up and Down models, aa reversible (Up-Down),
counter is also available K3HB-VLC-L1ET11 AC100-240.
Maximum counting speed of 5,000 cps, never before attained by,
a small-size preset counter.
Power supply freely selectable within a range of 100 to 240 VAC.
Also, poweer supply for the DC-operated models is selectable,
within a range of 12 to 48 V K3HB-VLC-L1ET11 AC100-240.
Models with memory backup function against power failure available.


...More relevant models >>>>