Item: Sensor head 1.5 m type.
Easy temperature and humidity control with an SD Card. Item: Sensor head 10 m type.
Easy temperature and humidity control with an SD Card. Appearance: Sensor head: 1.5 m type.
Temperature: Measurement range, –25 to 60°C;
Measurement precision, ±0.3°C (at 25°C); Resolution, 0 OMRON KM20-CTF-200A. 1°C.
Relative humidity: Measurement range, 0 to 99%;
Measurement precision, ±2 KM20-CTF-200A5% (at 25°C, 10 to 85%); Resolution, 0.1%.
Weight (packaged): Approx. 300 g.
Accessories: Mounting screw (M3 x 8) x 1.
Easy temperature and humidity control with an SD Card. Appearance: Sensor head: Anchored type.
Temperature: Measurement range, 0 to 60°C;
Measurement precision, ±0.3°C (at 25°C); Resolution, 0 OMRON KM20-CTF-200A. 1°C.
Relative humidity: Measurement range, 20 to 85%;
Measurement precision, ±2.5% (at 25°C, 10 to 85%); Resolution, 0.1%.
Weight (packaged): Approx. 300 g.
Accessories: Mounting screw (M3 x 8) x 1 Caps to secure cable,
(one for each, front and rear).
Easy temperature and humidity control with an SD Card. Rated primary current: 600 A.
Rated secondary current: Special output.
Installation: Installed separately OMRON KM20-CTF-200A.
High-performance Power Monitor Suitable for On-panel Mounting and Display.
Assists Energy-saving Analysis.
Energy classification for wasted standby and stopped power.
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function.
Simple temperature measurements with Temperature Sensor included in the Unit.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power.
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stopped ppower KM20-CTF-200A. )
Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settingss KM20-CTF-200A.
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection.