LK Automation Limited
Brand:
OMRON
M22-CG-T1 | OMRON Indicator M22-CG-T1
OMRON M22-CG-T1 Manual And Instructions
M22-CG-T1 datasheetPDF datasheet
OMRON M22-CG-T1 Product information and technical parameters：
Brand: OMRON
Name: Indicator
Model: M22-CG-T1
Appearance: Square/Projection with Voltage Reduction Unit M22-C.
Lighting: LED.
Operating voltage: 100 VAC.
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Round Indicator Series with 22 dia. and.
25 dia. (when using a ring).
Same type as the A22-series Pushbutton Switches.
Use 25-dia. ring to install in 25-dia. panel cutouts.
IP65.
...More relevant models >>>>
M22-CG-T1 datasheetPDF datasheet
OMRON M22-CG-T1 Product information and technical parameters：
Brand: OMRON
Name: Indicator
Model: M22-CG-T1
Appearance: Square/Projection with Voltage Reduction Unit M22-C.
Lighting: LED.
Operating voltage: 100 VAC.
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Round Indicator Series with 22 dia. and.
25 dia. (when using a ring).
Same type as the A22-series Pushbutton Switches.
Use 25-dia. ring to install in 25-dia. panel cutouts.
IP65.
Model: A7BS.
Classification (See note 1.): Snap-in (front mounting).
Character height: Decimal: 4.8 mm Hexadecimal: 3.2 mm.
Terminals: Solder terminals *1.
Color: Light gray.
Output code number: 55 (binary coded hexadecimal,
with component-adding provision) *3.
Wide Range of Locking-type.
Models Available OMRON M22-CG-T1.
Character height of 4.8 or 3.2 mm makes for easy-to,
view display M22-CG-T1
Installation is easy with snap-in mounting.
The series includes a complete range of locking-type,
models that prevent accidental operation. Type: no wing.
Drive shaft type: semi cylindrical plug type.
Outlet hole: 4.
Even number: 5.
Rubber material: NBR.
Head and body integration, strength and sealing performance is better, mechanical life is also significantly increased (5 million times) OMRON M22-CG-T1.
The most suitable for a variety of machine tools, automatic production line of the order control.
With drain holes, oil and water can be discharged after immersion. Type: square.
Screen mode: no segmentation.
Using voltage: DC12V.
Operation Department color: Red / green.
Micro design, the length of the body is only 23mm OMRON M22-CG-T1.
LED has five colors (red, yellow, green, white, and blue).
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient. Output configuration: PNP open collector (+ common).
Contact form: SPST-NC.
Operation indicator: ON when not operated.
Cable length: 1 m.
Optical System Achieves 1-μm Operating Position.
Repeatability in this 4-way Switch.
No-contact structure for high reliability.
Ceramic materials in measuring part for superior resistance to abrasion.
Two different output types (PNP and NPN) available. ,
Less abrasion and damage of mechanical contacts compared,
to switches with contacts, reducing fluctuation in the output.
More compact than previous OMRON models: 40% less mass,
15% lighter across the operating width M22-CG-T1. Number of notches: 2 notches.
Output: SPDT.
Reset method: Manual.
Key release position: Left.
Separate Construction with Cylindrical.
16-dia. M22-CG-T1. Body.
Short mounting depth, less than 28.5 mm below panel.
Wide range of switching capacity from standard to microload.
Oil-resistant IP65 models.
Classification (See note 1.): Snap-in (front mounting).
Character height: Decimal: 4.8 mm Hexadecimal: 3.2 mm.
Terminals: Solder terminals *1.
Color: Light gray.
Output code number: 55 (binary coded hexadecimal,
with component-adding provision) *3.
Wide Range of Locking-type.
Models Available OMRON M22-CG-T1.
Character height of 4.8 or 3.2 mm makes for easy-to,
view display M22-CG-T1
Installation is easy with snap-in mounting.
The series includes a complete range of locking-type,
models that prevent accidental operation. Type: no wing.
Drive shaft type: semi cylindrical plug type.
Outlet hole: 4.
Even number: 5.
Rubber material: NBR.
Head and body integration, strength and sealing performance is better, mechanical life is also significantly increased (5 million times) OMRON M22-CG-T1.
The most suitable for a variety of machine tools, automatic production line of the order control.
With drain holes, oil and water can be discharged after immersion. Type: square.
Screen mode: no segmentation.
Using voltage: DC12V.
Operation Department color: Red / green.
Micro design, the length of the body is only 23mm OMRON M22-CG-T1.
LED has five colors (red, yellow, green, white, and blue).
Chip LED to produce a uniform surface brightness.
From the front panel installation, more convenient. Output configuration: PNP open collector (+ common).
Contact form: SPST-NC.
Operation indicator: ON when not operated.
Cable length: 1 m.
Optical System Achieves 1-μm Operating Position.
Repeatability in this 4-way Switch.
No-contact structure for high reliability.
Ceramic materials in measuring part for superior resistance to abrasion.
Two different output types (PNP and NPN) available. ,
Less abrasion and damage of mechanical contacts compared,
to switches with contacts, reducing fluctuation in the output.
More compact than previous OMRON models: 40% less mass,
15% lighter across the operating width M22-CG-T1. Number of notches: 2 notches.
Output: SPDT.
Reset method: Manual.
Key release position: Left.
Separate Construction with Cylindrical.
16-dia. M22-CG-T1. Body.
Short mounting depth, less than 28.5 mm below panel.
Wide range of switching capacity from standard to microload.
Oil-resistant IP65 models.
...More relevant models >>>>