LK Automation Limited
Brand:
OMRON
MY4IN-CR | OMRON Miniature Power Relays MY4IN-CR
OMRON MY4IN-CR Manual And Instructions
MY4IN-CR datasheetPDF datasheet
MY4IN-CR datasheetPDF datasheet
OMRON MY4IN-CR Product information and technical parameters：
Brand: OMRON
Name: Miniature Power Relays
Model: MY4IN-CR
Classification: Models with built-in CR circuit for coil surge absorption.
Contact configuration: 4 .
Rated voltage: Standard products, --;
Made-to-order items, 100/110 or 200/220 VAC.
New Latching Levers for Circuit Checking.
Added to Our Best-selling.
MY General-purpose Relays.
Now lead-free to protect the environment.
VDE certification (Germany).
Different colors of coil tape for AC and,
DC models to more easily distinguish them.
MY(S) models with latching levers added for,
easier circuit checking.
...More relevant models >>>>
MY4IN-CR datasheetPDF datasheet
MY4IN-CR datasheetPDF datasheet
OMRON MY4IN-CR Product information and technical parameters：
Brand: OMRON
Name: Miniature Power Relays
Model: MY4IN-CR
Classification: Models with built-in CR circuit for coil surge absorption.
Contact configuration: 4 .
Rated voltage: Standard products, --;
Made-to-order items, 100/110 or 200/220 VAC.
New Latching Levers for Circuit Checking.
Added to Our Best-selling.
MY General-purpose Relays.
Now lead-free to protect the environment.
VDE certification (Germany).
Different colors of coil tape for AC and,
DC models to more easily distinguish them.
MY(S) models with latching levers added for,
easier circuit checking.
Terminal (wire connection): Screw terminal.
Applicable output load: DC load.
Zero cross function: --.
Rated input voltage: AC 200V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel OMRON MY4IN-CR.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals MY4IN-CR
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires OMRON MY4IN-CR.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Type: Standard.
Latching lever (Test switch): NO.
Rated input voltage: DC, 21.
Applicable model: G2RV-SR700/500 DC24V, G2RV-SR700/500 AC/DC24V.
Global standard size, low profile slim OMRON MY4IN-CR.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 10 A at 24 to 240 VAC.
Rated input voltage: 5 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum designn of heat sink MY4IN-CR.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply witth VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load MY4IN-CR.
Certified by UL, CSA, and VDE (reinforced insulation).
Applicable output load: DC load.
Zero cross function: --.
Rated input voltage: AC 200V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel OMRON MY4IN-CR.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals MY4IN-CR
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires OMRON MY4IN-CR.
Screw terminal is also stocked to meet the screw type needs.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Type: Standard.
Latching lever (Test switch): NO.
Rated input voltage: DC, 21.
Applicable model: G2RV-SR700/500 DC24V, G2RV-SR700/500 AC/DC24V.
Global standard size, low profile slim OMRON MY4IN-CR.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 10 A at 24 to 240 VAC.
Rated input voltage: 5 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum designn of heat sink MY4IN-CR.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply witth VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load MY4IN-CR.
Certified by UL, CSA, and VDE (reinforced insulation).
...More relevant models >>>>