LK Automation Limited
Brand:
OMRON
P2RF-08-PU | OMRON Plus Push-In terminal socket P2RF-08-PU
OMRON P2RF-08-PU Product information and technical parameters：
Brand: OMRON
Name: Plus Push-In terminal socket
Model: P2RF-08-PU
Socket body.
Representative examples of applicable models.
General relay: G2R-_-S series; G2R-2-S.
Timer: H3RN series; H3RN-2-B.
Liquid leakage detector: K7L series; K7L-_B.
Pole number: 2.
Socket for MY relay, G2R-S relay.
Save hours of Push-InPlus terminal type to add product series.
Using Plus Push-In terminal, compared with the previous screw terminals,
Save wiring time (compared with the previous screw terminals, can shorten the wiring time of about 60%*).
Screw will not loose, to achieve maintenance free.
The insertion force is small, the drawing strength is big, and the wiring time is saved, and the high reliability is simultaneously considered.
When connecting multiple strands, the use of non - holding mechanism,
Insert a word screwdriver to keep it.
2 wires can be inserted in each terminal.
DIN guide rail installation, screw mounting common.
Time specification: Instantaneous type.
Current setting range: 50 to 160 A.
Operating voltage: 400/440 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON P2RF-08-PU.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase P2RF-08-PU
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON P2RF-08-PU. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. AC adapter: incidental.
Body size: 130mm.
Slim and lightweight, optional 3 models,
Play excellent setting.
Narrow operating table and high can also be a simple setting OMRON P2RF-08-PU.
Thin 6cm quality 1kg* slim, lightweight body. (ZJ-FW029)Power supply voltage: 100 to 240 VAC.
Output: Relay.
Timer function: No.
Features: Single-function with two inputs/one output (AND/OR operation).
Offers High-speed Input Response of,
0.1 ms and Equipped with Built-in Timer,
High-speed response of 0.1 ms.
Ideal as a two-input Controller.
Lineup includes the S3D2-BK with flip-flop functions convenient for,
level control, the S3D2-AKD/CKD/CCD with 24-V power supply, and,
the S3D2-DK/EK with one input/output OFF-delay (two circuits),
useful for load control and lamp display,
Poower source for the Sensor can be supplied up to 200 mA P2RF-08-PU.
Ultra-slim body with 30-mm width.
Multi-function model equipped with timer functions also available. Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.6a .
Cabble sheath material: LSZH P2RF-08-PU.
Cable color: Yellow.
Cable length: 0.2 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks.
Current setting range: 50 to 160 A.
Operating voltage: 400/440 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON P2RF-08-PU.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase P2RF-08-PU
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON P2RF-08-PU. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. AC adapter: incidental.
Body size: 130mm.
Slim and lightweight, optional 3 models,
Play excellent setting.
Narrow operating table and high can also be a simple setting OMRON P2RF-08-PU.
Thin 6cm quality 1kg* slim, lightweight body. (ZJ-FW029)Power supply voltage: 100 to 240 VAC.
Output: Relay.
Timer function: No.
Features: Single-function with two inputs/one output (AND/OR operation).
Offers High-speed Input Response of,
0.1 ms and Equipped with Built-in Timer,
High-speed response of 0.1 ms.
Ideal as a two-input Controller.
Lineup includes the S3D2-BK with flip-flop functions convenient for,
level control, the S3D2-AKD/CKD/CCD with 24-V power supply, and,
the S3D2-DK/EK with one input/output OFF-delay (two circuits),
useful for load control and lamp display,
Poower source for the Sensor can be supplied up to 200 mA P2RF-08-PU.
Ultra-slim body with 30-mm width.
Multi-function model equipped with timer functions also available. Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.6a .
Cabble sheath material: LSZH P2RF-08-PU.
Cable color: Yellow.
Cable length: 0.2 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks.
...More relevant models >>>>