LK Automation Limited
Brand:
OMRON
PFP-S | OMRON Optional DIN Track Products PFP-S
OMRON PFP-S Manual And Instructions
PFP-S datasheetPDF datasheet
OMRON PFP-S Product information and technical parameters：
Brand: OMRON
Name: Optional DIN Track Products
Model: PFP-S
Name: Spacer.
Minimum order (unit): 10.
Ordering Information.
...More relevant models >>>>
PFP-S datasheetPDF datasheet
OMRON PFP-S Product information and technical parameters：
Brand: OMRON
Name: Optional DIN Track Products
Model: PFP-S
Name: Spacer.
Minimum order (unit): 10.
Ordering Information.
Cable type: Standard Cables.
Type: Cable with Plugs on Both Ends (M12 Straight/M12 Straight).
Cable length: 5 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Power rating: 25 W.
Input voltage: 100 to 240 VAC (allowable range: 85 to 264 VAC or 120 to 370 VDC*1).
Output voltage: 24 V VDC OMRON PFP-S.
Output current: 1.1 A.
Built-in fan: None.
Model with terminal block facing upward PFP-S
High Reliability at a Reasonable Cost.
Reliable, Basic Power Supplies That,
Contribute to Stable Equipment Operation.
High Reliability: Enhanced abnormal overvoltage,
resistance and lightning surge resistance for stable,
operation even with an unstable input voltage.
Long Life: Japanese 105°C electrolytic capacitors are used,
to achieve stable quality and long life OMRON PFP-S. A reliable 3-year warranty.
Wide Input Ranges: 100 to 120 VAC and 200 to 240 VAC,
Full Lineup: Models are available for the main output,
voltages and capacities used in FA applications.
Global Standards: Conforms to CE (all models),
Approved for UL (all models) and CCC (15 to 150-W models).
Easy mounting to DIN Rails with Mounting Brackets (sold separately) OMRON PFP-S.
Refer to Period and Terms of W. Time specification: Instantaneous type.
Current setting range: 20 to 65 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easilyy because operation time,
is indicated from the start of operation PFP-S.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequeency, basic,
frequency, and load conditions PFP-S. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
Type: Cable with Plugs on Both Ends (M12 Straight/M12 Straight).
Cable length: 5 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Power rating: 25 W.
Input voltage: 100 to 240 VAC (allowable range: 85 to 264 VAC or 120 to 370 VDC*1).
Output voltage: 24 V VDC OMRON PFP-S.
Output current: 1.1 A.
Built-in fan: None.
Model with terminal block facing upward PFP-S
High Reliability at a Reasonable Cost.
Reliable, Basic Power Supplies That,
Contribute to Stable Equipment Operation.
High Reliability: Enhanced abnormal overvoltage,
resistance and lightning surge resistance for stable,
operation even with an unstable input voltage.
Long Life: Japanese 105°C electrolytic capacitors are used,
to achieve stable quality and long life OMRON PFP-S. A reliable 3-year warranty.
Wide Input Ranges: 100 to 120 VAC and 200 to 240 VAC,
Full Lineup: Models are available for the main output,
voltages and capacities used in FA applications.
Global Standards: Conforms to CE (all models),
Approved for UL (all models) and CCC (15 to 150-W models).
Easy mounting to DIN Rails with Mounting Brackets (sold separately) OMRON PFP-S.
Refer to Period and Terms of W. Time specification: Instantaneous type.
Current setting range: 20 to 65 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easilyy because operation time,
is indicated from the start of operation PFP-S.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequeency, basic,
frequency, and load conditions PFP-S. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
...More relevant models >>>>