LK Automation Limited
Brand:
OMRON
PYDM-08SR | OMRON Products Related to Common Sockets and DIN Tracks PYDM-08SR
OMRON PYDM-08SR Manual And Instructions
PYDM-08SR datasheetPDF datasheet
OMRON PYDM-08SR Product information and technical parameters：
Brand: OMRON
Name: Products Related to Common Sockets and DIN Tracks
Model: PYDM-08SR
Pitch: 19.7 mm.
Applicable models: PYF08S.
Insulation color: Red.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available.
...More relevant models >>>>
PYDM-08SR datasheetPDF datasheet
OMRON PYDM-08SR Product information and technical parameters：
Brand: OMRON
Name: Products Related to Common Sockets and DIN Tracks
Model: PYDM-08SR
Pitch: 19.7 mm.
Applicable models: PYF08S.
Insulation color: Red.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available.
Time specification: Inverse type.
Current setting range: 8 to 26 A.
Operating voltage: 400/440 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON PYDM-08SR.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase PYDM-08SR
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON PYDM-08SR. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Cable: PVC.
Cable core number (core): 3.
Cable outlet direction: L type.
Cable length L:10m.
The province, province hours maintenance, use waterproof connector environment and strong tolerance of FA OMRON PYDM-08SR.
Conform to IP67. FA small special connector flame retardant 94V-0.
The connector wiring system, convenient equipment maintenance, reduce equipment downtime.
IEC61076-2-101 (IEC60947-5-2).
For LED products, can clearly confirm the status of the sensor action. No. of cable cores: 4.
Item: Vibration-proof robot cable.
Cable connection direction: Straight.
Cable length L: 1 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect withh one touch PYDM-08SR.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles. Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.6a .
Cabble sheath material: LSZH PYDM-08SR.
Cable color: Yellow.
Cable length: 7.5 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks.
Current setting range: 8 to 26 A.
Operating voltage: 400/440 VAC.
Resetting method: Automatic (See note.).
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON PYDM-08SR.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase PYDM-08SR
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON PYDM-08SR. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Cable: PVC.
Cable core number (core): 3.
Cable outlet direction: L type.
Cable length L:10m.
The province, province hours maintenance, use waterproof connector environment and strong tolerance of FA OMRON PYDM-08SR.
Conform to IP67. FA small special connector flame retardant 94V-0.
The connector wiring system, convenient equipment maintenance, reduce equipment downtime.
IEC61076-2-101 (IEC60947-5-2).
For LED products, can clearly confirm the status of the sensor action. No. of cable cores: 4.
Item: Vibration-proof robot cable.
Cable connection direction: Straight.
Cable length L: 1 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect withh one touch PYDM-08SR.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles. Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.6a .
Cabble sheath material: LSZH PYDM-08SR.
Cable color: Yellow.
Cable length: 7.5 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks.
...More relevant models >>>>