LK Automation Limited
Brand:
OMRON
TP70-1S3 | OMRON On-site Flexible Rod Switch TP70-1S3
OMRON TP70-1S3 Manual And Instructions
TP70-1S3 datasheetPDF datasheet
OMRON TP70-1S3 Product information and technical parameters：
Brand: OMRON
Name: On-site Flexible Rod Switch
Model: TP70-1S3
Name: On-site Flexible Rod Switch (with separable emergency stop switch).
Mounting method: C-clamp mounting.
Easy on-site input on-the-move.
Incorporation of plastic rod actuator makes the Switch easy on hands.
One-way operation:
Equipped with stopper so that operation is only possible from one direction.
Distinctive yellow used for the body.
Three different types of mounting are available.
Models with emergency-stop switch are available to suit the application.
...More relevant models >>>>
TP70-1S3 datasheetPDF datasheet
OMRON TP70-1S3 Product information and technical parameters：
Brand: OMRON
Name: On-site Flexible Rod Switch
Model: TP70-1S3
Name: On-site Flexible Rod Switch (with separable emergency stop switch).
Mounting method: C-clamp mounting.
Easy on-site input on-the-move.
Incorporation of plastic rod actuator makes the Switch easy on hands.
One-way operation:
Equipped with stopper so that operation is only possible from one direction.
Distinctive yellow used for the body.
Three different types of mounting are available.
Models with emergency-stop switch are available to suit the application.
Appearance: Square/Projection type LED lighting,
(without Voltage Reduction Unit) A22L-D.
Output: SPST-NO + SPST-NC + SPST-NC.
Lighting: LED.
Operating voltage: 24 VAC/VDC.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia OMRON TP70-1S3. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit TP70-1S3
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals OMRON TP70-1S3.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Category: snap in type (pre installed).
Character height: decimal: 4.8mm, sixteen hex: 3.2mm.
Terminal: welding terminal.
Terminal color: black.
Output code number: 19 (decimal code, with parts to increase the provisions).
Locked in series.
Character height 4.8 or 3.2mm to make the display easy to view.
Installing the card into the installation makes it easy to install OMRON TP70-1S3.
This series includes all lock type to prevent accidental operation. Output: DPDT.
Lighting: Incandescent lamp.
Operating voltage: 24 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Output: DPDT.
Lighting: Non-lighted.
Pushbutton colorsymbol: R: red, Y: yelllow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2 TP70-1S3.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detaachable Switch TP70-1S3.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1.
(without Voltage Reduction Unit) A22L-D.
Output: SPST-NO + SPST-NC + SPST-NC.
Lighting: LED.
Operating voltage: 24 VAC/VDC.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia OMRON TP70-1S3. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit TP70-1S3
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals OMRON TP70-1S3.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Category: snap in type (pre installed).
Character height: decimal: 4.8mm, sixteen hex: 3.2mm.
Terminal: welding terminal.
Terminal color: black.
Output code number: 19 (decimal code, with parts to increase the provisions).
Locked in series.
Character height 4.8 or 3.2mm to make the display easy to view.
Installing the card into the installation makes it easy to install OMRON TP70-1S3.
This series includes all lock type to prevent accidental operation. Output: DPDT.
Lighting: Incandescent lamp.
Operating voltage: 24 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Output: DPDT.
Lighting: Non-lighted.
Pushbutton colorsymbol: R: red, Y: yelllow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2 TP70-1S3.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detaachable Switch TP70-1S3.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1.
...More relevant models >>>>