LK Automation Limited
Brand:
OMRON
XS3F-S422-402-R | OMRON Round Water-resistant Connectors XS3F-S422-402-R
OMRON XS3F-S422-402-R Manual And Instructions
XS3F-S422-402-R datasheetPDF datasheet
OMRON XS3F-S422-402-R Product information and technical parameters：
Brand: OMRON
Name: Round Water-resistant Connectors
Model: XS3F-S422-402-R
No. of cable cores: 4.
Item: Vibration-proof robot cable.
Cable connection direction: Right-angle.
Cable length L: 2 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles.
...More relevant models >>>>
XS3F-S422-402-R datasheetPDF datasheet
OMRON XS3F-S422-402-R Product information and technical parameters：
Brand: OMRON
Name: Round Water-resistant Connectors
Model: XS3F-S422-402-R
No. of cable cores: 4.
Item: Vibration-proof robot cable.
Cable connection direction: Right-angle.
Cable length L: 2 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles.
Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 400/440 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON XS3F-S422-402-R.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase XS3F-S422-402-R
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON XS3F-S422-402-R. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three OMRON XS3F-S422-402-R.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequenncy, and load conditions XS3F-S422-402-R. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.6a .
Caable sheath material: LSZH XS3F-S422-402-R.
Cable color: Green.
Cable length: 0.2 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks.
Current setting range: 50 to 160 A.
Operating voltage: 400/440 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON XS3F-S422-402-R.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase XS3F-S422-402-R
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON XS3F-S422-402-R. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three OMRON XS3F-S422-402-R.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequenncy, and load conditions XS3F-S422-402-R. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.6a .
Caable sheath material: LSZH XS3F-S422-402-R.
Cable color: Green.
Cable length: 0.2 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks.
...More relevant models >>>>