LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
XS3P-S421-1 | OMRON Round Water-resistant Connectors XS3P-S421-1
OMRON XS3P-S421-1 Manual And Instructions
XS3P-S421-1 datasheetPDF datasheet

OMRON XS3P-S421-1 Product information and technical parameters:
Brand: OMRON
Name: Round Water-resistant Connectors
Model: XS3P-S421-1
Connection method: S8 snap-in.
Panel mounting: Front lock or rear lock.
Pin shape: DIP pins.
Applicable wires: --.
Minimum order: 50.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles.

Cable specifications: Fire-retardant, Robot cable.
Cable length L: 5 m.
Cable outer diameter: 6 mm.
Angled (Socket)/straight (Plug).
Minimum order: 5.
UL: Yes.
Round Water-resistive Smartclick.
Connectors That Reduce Installation Work.
A newly developed lock mechanism that is compatible with round M12 connectors OMRON XS3P-S421-1.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock XS3P-S421-1
A positive click indicates locking.
Features the same degree of protection (IP67) as M12 connectors.
A full line-up of models is planned.
Connectors with Cables are UL approved. Control supply voltage: 110 VAC; With voltage fluctuation compensation.
Operating current: 4 to 10 A.
Accurate Detection of Heater Element OMRON XS3P-S421-1.
Burnout Regardless of Heater Capacities.
Accurately detects a burned heater element or elements incor,
porated by a molding machine or packing machine and outputs,
an alarm signal.
Precisely singles out the burned element even if one heater el,
ement among several heater elements has been burned out.
Applicable to small- to large-capacity heater elements.
All K2CU-F large-capacity, built-in current transformer models,
work with both single-phase and three-phase heaters OMRON XS3P-S421-1.
Voltage fluctuation compensation function eliminates false,
alarms due to variations in the supply voltage. Lock method: Rear lock.
Pin shape: Solder cup pin.
Applicable wire diameter: AWG20 to 28.
DC: Model.
Minimum order: 50.
Water- and Environment-resistive FA.
Connectors Save Wiring and Maintenance Effort.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating.
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202. Rated input: 3-phase 3-wire mode, 3-phase 4-wire mode;
200, 220, 230, 240 VAC, 115, 127, 133, 138 VAC.
Ideal for 3-phase Voltage Asymmetry.
Monitoring for Industrial Facilities and Equipment.
Greater resistance to invverter noise XS3P-S421-1.
Monitor voltage asymmetry, phase sequence, and phase,
loss for three-phase 3-wire or 4-wire power supplies with just one Unit.
Switch setting for 3-phase 3-wire or 3-phase 4-wire power supply.
One SPDT output relay, 5 AA at 250 VAC (resistive load) XS3P-S421-1.
World-wide power specifications supported by one Unit (switchable).
Relay status can be monitored using LED indicator.


...More relevant models >>>>
Last one: OMRON XS3P-M422-2
next one: OMRON XS3P-S421-2