LK Automation Limited
Brand:
OMRON
XW2B-50G4 | OMRON Standard-type Connector-Terminal Block Conversion Units XW2B-50G4
OMRON XW2B-50G4 Manual And Instructions
XW2B-50G4 datasheetPDF datasheet
OMRON XW2B-50G4 Product information and technical parameters：
Brand: OMRON
Name: Standard-type Connector-Terminal Block Conversion Units
Model: XW2B-50G4
Type: Flat Cable.
Terminal Block: Terminal block with M3 screws.
Connector: Flat Cable Connectors*1.
No. of poles: 50.
Simplifies Connector and terminal,
block replacement, and requires less,
in-panel wiring.
Mount to DIN Track or via screws.
MIL Flat Cable Connectors and Multi-pole, Square,
Connectors are standard.
Terminal blocks available with either M3 or M3.5 screws.
Connecting Cables for Programmable Controllers,
available (sold separately).
...More relevant models >>>>
XW2B-50G4 datasheetPDF datasheet
OMRON XW2B-50G4 Product information and technical parameters：
Brand: OMRON
Name: Standard-type Connector-Terminal Block Conversion Units
Model: XW2B-50G4
Type: Flat Cable.
Terminal Block: Terminal block with M3 screws.
Connector: Flat Cable Connectors*1.
No. of poles: 50.
Simplifies Connector and terminal,
block replacement, and requires less,
in-panel wiring.
Mount to DIN Track or via screws.
MIL Flat Cable Connectors and Multi-pole, Square,
Connectors are standard.
Terminal blocks available with either M3 or M3.5 screws.
Connecting Cables for Programmable Controllers,
available (sold separately).
Cable type: Standard Cables.
Type: Cable with Plugs on Both Ends (M12 Straight/M12 Straight) .
Cable length: 15 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Sensor type: 3 wire DC / DC (NPN) 3 - 4 2 wire.
Input points: 6.
The I/O sensor connector for centralized wiring,
And the province of the number of processes, strong environmental resistance as the goal,
The outer control relay box OMRON XW2B-50G4 XW2B-50G4
Compact and strong centralized wiring trunk box conforming to IP67.
The corresponding sensing I/O connector mode proximity switch, limit switch,
Photoelectric switch.
With the power to show LED, action shows LED.
The installation dimensions are the same and are not related to the number of input points,
Therefore, the addition of a simple exchange OMRON XW2B-50G4.
A series of sensors with self diagnostic features are added to the product. Type: S8JC-ZS series models list.
Meet the criteria: CE (EN50178).
Configuration: power supply with cover; bottom surface mounting.
Input voltage: 35W.
Output voltage: 24VDC.
Output current: 1.5A.
Economic type power supply S8JC-Z additional models,
The new power S8JC-ZS has a CE certification mark to market OMRON XW2B-50G4.
Product features: reduce material costs;
Export machinery to be used to meet specific safety standards;
Through the DIN guide rail installation, significant savings in time. Name: Finger Guard.
Datasheet available: Refer to page 25.
Optimum Cooling with a Comprehensive.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bladed models,
(28 type) included in series XW2B-50G4.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certiffied safety standards depend on the,
product XW2B-50G4. Check the information given for available models of Axial fans and,
the information in Characteristics.
Type: Cable with Plugs on Both Ends (M12 Straight/M12 Straight) .
Cable length: 15 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Sensor type: 3 wire DC / DC (NPN) 3 - 4 2 wire.
Input points: 6.
The I/O sensor connector for centralized wiring,
And the province of the number of processes, strong environmental resistance as the goal,
The outer control relay box OMRON XW2B-50G4 XW2B-50G4
Compact and strong centralized wiring trunk box conforming to IP67.
The corresponding sensing I/O connector mode proximity switch, limit switch,
Photoelectric switch.
With the power to show LED, action shows LED.
The installation dimensions are the same and are not related to the number of input points,
Therefore, the addition of a simple exchange OMRON XW2B-50G4.
A series of sensors with self diagnostic features are added to the product. Type: S8JC-ZS series models list.
Meet the criteria: CE (EN50178).
Configuration: power supply with cover; bottom surface mounting.
Input voltage: 35W.
Output voltage: 24VDC.
Output current: 1.5A.
Economic type power supply S8JC-Z additional models,
The new power S8JC-ZS has a CE certification mark to market OMRON XW2B-50G4.
Product features: reduce material costs;
Export machinery to be used to meet specific safety standards;
Through the DIN guide rail installation, significant savings in time. Name: Finger Guard.
Datasheet available: Refer to page 25.
Optimum Cooling with a Comprehensive.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bladed models,
(28 type) included in series XW2B-50G4.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certiffied safety standards depend on the,
product XW2B-50G4. Check the information given for available models of Axial fans and,
the information in Characteristics.
...More relevant models >>>>