LK Automation Limited
Brand:
OMRON
XW2C-20G6-IO16 | OMRON Connector-Terminal Block Conversion Unit XW2C-20G6-IO16
OMRON XW2C-20G6-IO16 Manual And Instructions
XW2C-20G6-IO16 datasheetPDF datasheet
OMRON XW2C-20G6-IO16 Product information and technical parameters：
Brand: OMRON
Name: Connector-Terminal Block Conversion Unit
Model: XW2C-20G6-IO16
No. of inputs: 16.
No. of poles: 20.
Mounted Connector model: XG4A-2031.
Cable Connector model: XG4M-2030-T.
Common terminal provided.
Use for either PLC Input Unit or Output,
Unit merely by changing short bar.
...More relevant models >>>>
XW2C-20G6-IO16 datasheetPDF datasheet
OMRON XW2C-20G6-IO16 Product information and technical parameters：
Brand: OMRON
Name: Connector-Terminal Block Conversion Unit
Model: XW2C-20G6-IO16
No. of inputs: 16.
No. of poles: 20.
Mounted Connector model: XG4A-2031.
Cable Connector model: XG4M-2030-T.
Common terminal provided.
Use for either PLC Input Unit or Output,
Unit merely by changing short bar.
Type: open type.
Structure: bottom mounting type.
Capacity: 150W.
Output voltage: 12V.
Output current: 12.5A.
Built in OMRON''s original new under voltage detection function of small size,
Also contribute to the miniaturization of the device.
Built in support for determining the abnormal causes of the new under voltage detection function OMRON XW2C-20G6-IO16.
(S8VM- - P - 24A - racy type)
Power failure detection function with built-in hint output voltage abnormity XW2C-20G6-IO16
(type 300/600/1500W)
A total of 8 kinds of capacity of 29 models, a complete range of products.
Meet RoHS instructions including lead free.
Humanized design of anti - shedding screw for terminal stage.
(except for the 300/600/1500W output terminals)
Support finger touch protection to prevent electric shock OMRON XW2C-20G6-IO16.
DIN guide rail simple installation.
Safety standards: CSA, C22.2 No.14/No.60950-1 UL508/60950-1,
EN50178, EN60950-1.
(300/600/1500W type, safety standard is not applicable when the fan is replaced by the customer.)
Meet F47-0200 SEMI standards. (200V input)
High harmonic current limit: EN61000-3-2. (except for type 15/30W)
Time specification: Inverse type OMRON XW2C-20G6-IO16.
Current setting range: 20 to 65 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation XW2C-20G6-IO16.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequeency, basic,
frequency, and load conditions XW2C-20G6-IO16. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
Structure: bottom mounting type.
Capacity: 150W.
Output voltage: 12V.
Output current: 12.5A.
Built in OMRON''s original new under voltage detection function of small size,
Also contribute to the miniaturization of the device.
Built in support for determining the abnormal causes of the new under voltage detection function OMRON XW2C-20G6-IO16.
(S8VM- - P - 24A - racy type)
Power failure detection function with built-in hint output voltage abnormity XW2C-20G6-IO16
(type 300/600/1500W)
A total of 8 kinds of capacity of 29 models, a complete range of products.
Meet RoHS instructions including lead free.
Humanized design of anti - shedding screw for terminal stage.
(except for the 300/600/1500W output terminals)
Support finger touch protection to prevent electric shock OMRON XW2C-20G6-IO16.
DIN guide rail simple installation.
Safety standards: CSA, C22.2 No.14/No.60950-1 UL508/60950-1,
EN50178, EN60950-1.
(300/600/1500W type, safety standard is not applicable when the fan is replaced by the customer.)
Meet F47-0200 SEMI standards. (200V input)
High harmonic current limit: EN61000-3-2. (except for type 15/30W)
Time specification: Inverse type OMRON XW2C-20G6-IO16.
Current setting range: 20 to 65 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation XW2C-20G6-IO16.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequeency, basic,
frequency, and load conditions XW2C-20G6-IO16. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
...More relevant models >>>>
Related download