LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
Y92H-3 | OMRON Common socket /DIN guide rail related products Y92H-3
OMRON Y92H-3 Manual And Instructions
Y92H-3 datasheetPDF datasheet

OMRON Y92H-3 Product information and technical parameters:
Brand: OMRON
Name: Common socket /DIN guide rail related products
Model: Y92H-3
Square socket.
Equipped with a wide variety of square and round sockets,
Surface connection and back connection.
With a finger touch protection type.
With the fixed bracket, PYF cross tab.
Add no screw series.

Ideal for Monitoring 3-phase Power.
Supplies for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor overvoltages, undervoltages, phase sequence,
and phase loss for three-phase 3-wire or 4-wire power,
supplies with just one Unit.
Switch setting for 3-phase 3-wire or 3-phase 4-wire power supply OMRON Y92H-3.
Two SPDT output relays, 5 A at 250 VAC (resistive load) Y92H-3
Output overvoltages and undervoltages using separate relays.
World-wide power specifications supported by one Unit (switchable).
Output status can be monitored using LED indicator. Time specification: Instantaneous type.
Current setting range: 20 to 65 A.
Operating voltage: 400/440 VAC.
Resetting method: Manual OMRON Y92H-3.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation OMRON Y92H-3.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Smart Static Electricity Sensing: Making Static Electricity Visible.
Compact sensor head and smart digital amplifier measure,
the electrostatic charge quantity of workpieces at all times.
Multi-point measurements and data logging of the static,
electricity quantity can be performed easily.
Best long-distance, high-precision measurements in the industry. Terminal/mounting: Plug-in/DIN rail via socket.
Control voltage: 100/110/120 VAC.
Overcurrent detectioon: Instantaneous type, W/o start-up lock Y92H-3.
Solid-state, Plug-in Current Sensor.
Applicable to motor overcurrent protection and 3-phase AC current detection.
Inverse-type, start-up lock type, and instantaneous type over,
current sensors avvailable Y92H-3.
Instantaneous type under current sensor available.
Plug-in design simplifies installation, removal, and wiring.
DIN sized (48 mm x 96 mm).


...More relevant models >>>>
Last one: OMRON Y92H-1
next one: OMRON Y92H-4