LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
ZJ-BAS-MC11RB | OMRON Ionizer ZJ-BAS-MC11RB
OMRON ZJ-BAS-MC11RB Manual And Instructions
ZJ-BAS-MC11RB datasheetPDF datasheet
ZJ-BAS-MC11RB datasheetPDF datasheet
ZJ-BAS-MC11RB OPERATION MANUAL

OMRON ZJ-BAS-MC11RB Product information and technical parameters:
Brand: OMRON
Name: Ionizer
Model: ZJ-BAS-MC11RB
Type: Used for connecting Ionizers.
Cable length: 1,110 mm.
The highest level of ionization in its class.
Sensing and variable-AC system provides fast and meticulous ionization.
Linked Ionizers cover a wide area without causing uneven ionization.
Digital ion display provides simple and reliable settings.

Rated voltage: 115 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage.
Frequency: 50/60 Hz.
Rated current: 50 Hz, 0.200 A; 60 Hz, 0.170 A .
Rated input: 50 Hz, 16 W; 60 Hz, 14 W.
Rated rotational speed: 50 Hz, 2350 r/min; 60 Hz, 2750 r/min.
Maximum flow rate: 50 Hz, 1.7 m3/min; 60 Hz, 2 OMRON ZJ-BAS-MC11RB. 0 m3/min.
Maximum static pressure: 50 Hz, 36.7 Pa; 60 Hz, 37.3 Pa.
Noise: 50 Hz, 36 dB; 60 Hz, 40 dB ZJ-BAS-MC11RB
Optimum Cooling with a Comprehensive.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bladed models,
(28 type) included in series OMRON ZJ-BAS-MC11RB.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certified safety standards depend on the,
product. Check the information given for available models of Axial fans and,
the information in Characteristics. Rated input: 3-phase 3-wire mode, 3-phase 4-wire mode;
200, 220, 230, 240 VAC, 115, 127, 133, 138 VAC OMRON ZJ-BAS-MC11RB.
Ideal for Monitoring 3-phase Power.
Supplies for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor overvoltages, undervoltages, phase sequence,
and phase loss for three-phase 3-wire or 4-wire power,
supplies with just one Unit.
Switch setting for 3-phase 3-wire or 3-phase 4-wire power supply.
Two SPDT output relays, 5 A at 250 VAC (resistive load).
Output overvoltages and undervoltages using separate relays.
World-wide power specifications supported by one Unit (switcchable) ZJ-BAS-MC11RB.
Output status can be monitored using LED indicator. New Screwless Terminal Sockets Added.
for MY and G2R Relays.
Simplified wiring without tightening screws.
Two wires can be independently wired for each terminal.
Coil terrminals and contact terminals are completely separated,
in an organized wiring layout ZJ-BAS-MC11RB.
Release Levers and Nameplates are available (sold separately).


...More relevant models >>>>