LK Automation Limited
Brand:
OMRON
ZS-HLDS150 2M | OMRON CMOS 2D laser type intelligent sensor ZS-HLDS150 2M
OMRON ZS-HLDS150 2M Product information and technical parameters：
Brand: OMRON
Name: CMOS 2D laser type intelligent sensor
Model: ZS-HLDS150 2M
Optical system: diffuse type.
Detection distance: 1500 positive and negative 500mm.
Beam shape: linear beam.
Beam diameter: 40mm * 1.5 m.
Resolution: 500 m.
Cable length: 2m.
Power supply voltage: AC/DC power supply selectable type.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 40 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) OMRON ZS-HLDS150 2M ZS-HLDS150 2M
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON ZS-HLDS150 2M.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: none.
Shape: non shield, M12.
Detection range: 8mm.
Action mode: NC. High-accuracy Detection of Metal Workpiece Displacement OMRON ZS-HLDS150 2M.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).
Easily perform calculation for two Sensors by using a Calculating Unit.
Prevent mutual interference for up to five Units by using a Calculating Unit. Sensing method: Through-beam type.
Sensing distance(slot width): 3.6 mm.
Output type: NPN output.
Output configuration: Light-ON.
Cable length: 1 m.
Photomicrosensor with built-in,
amplifier and attached cable reduces,
external light interference.
Light modulation effectively reduces external light interference.
Wide operation voltage range: 5 to 24 VDC.
Easy operation monitoring with bright light indicator ZS-HLDS150 2M. Monitor the plasma light emission at 2 wavelengths.
To achieve a high precision, miniaturization, low price.
Easily realize the monitoring of etching and cleaning of the endpoints.
Monnitoring of plasma etching, cleaning the light emitting ZS-HLDS150 2M.
By using the filter to detect the 2 wavelength, the realization of miniaturization, low price.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 40 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models) OMRON ZS-HLDS150 2M ZS-HLDS150 2M
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON ZS-HLDS150 2M.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: none.
Shape: non shield, M12.
Detection range: 8mm.
Action mode: NC. High-accuracy Detection of Metal Workpiece Displacement OMRON ZS-HLDS150 2M.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).
Easily perform calculation for two Sensors by using a Calculating Unit.
Prevent mutual interference for up to five Units by using a Calculating Unit. Sensing method: Through-beam type.
Sensing distance(slot width): 3.6 mm.
Output type: NPN output.
Output configuration: Light-ON.
Cable length: 1 m.
Photomicrosensor with built-in,
amplifier and attached cable reduces,
external light interference.
Light modulation effectively reduces external light interference.
Wide operation voltage range: 5 to 24 VDC.
Easy operation monitoring with bright light indicator ZS-HLDS150 2M. Monitor the plasma light emission at 2 wavelengths.
To achieve a high precision, miniaturization, low price.
Easily realize the monitoring of etching and cleaning of the endpoints.
Monnitoring of plasma etching, cleaning the light emitting ZS-HLDS150 2M.
By using the filter to detect the 2 wavelength, the realization of miniaturization, low price.
...More relevant models >>>>