LK Automation Limited
Brand:
OMRON
ZX-TDS10T-VL | OMRON Smart Sensors ZX-TDS10T-VL
OMRON ZX-TDS10T-VL Manual And Instructions
ZX-TDS10T-VL User's Manual
ZX-TDS10T-VL User's Manual
ZX-TDS10T-VL Inductive DisplacementIntroduction Manual
ZX-TDS10T-VL OPERATION MANUAL
ZX-TDS10T-VL Operation Manual
OMRON ZX-TDS10T-VL Product information and technical parameters：
Brand: OMRON
Name: Smart Sensors
Model: ZX-TDS10T-VL
Size: 8 dia.
Type: Air Lift/Air Push Type.
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website.
...More relevant models >>>>
ZX-TDS10T-VL User's Manual
ZX-TDS10T-VL User's Manual
ZX-TDS10T-VL Inductive DisplacementIntroduction Manual
ZX-TDS10T-VL OPERATION MANUAL
ZX-TDS10T-VL Operation Manual
OMRON ZX-TDS10T-VL Product information and technical parameters：
Brand: OMRON
Name: Smart Sensors
Model: ZX-TDS10T-VL
Size: 8 dia.
Type: Air Lift/Air Push Type.
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website.
Size: M30 (brass), single distance, shielding type.
Detection range: 10mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: NPN.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio OMRON ZX-TDS10T-VL ZX-TDS10T-VL
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration OMRON ZX-TDS10T-VL. E32-D21B type: standard type; resistance to twists and turns,
Specialty: M4 screws (small),
Bending radius (mm): B; R4.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsSlit width: Width 1 × 20 mm.
Installation procedure: Seal type.
Applicable type: E3JM-10@4 (T)-N OMRON ZX-TDS10T-VL. Type: Shielded.
Appearance: Cylindrical, 5.4 dia. × 18 mm.
Sensing distance: 1 mm.
Repeat accuracy: 1 μm.
Cable specification: With Protective Spiral Tube.
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-ddia ZX-TDS10T-VL. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening witth,
fine positioning to maximize variations ZX-TDS10T-VL.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit.
Detection range: 10mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: long thread type.
Output type: NPN.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio OMRON ZX-TDS10T-VL ZX-TDS10T-VL
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site.
Simulation test was carried out in the environment of high oil mist concentration OMRON ZX-TDS10T-VL. E32-D21B type: standard type; resistance to twists and turns,
Specialty: M4 screws (small),
Bending radius (mm): B; R4.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsSlit width: Width 1 × 20 mm.
Installation procedure: Seal type.
Applicable type: E3JM-10@4 (T)-N OMRON ZX-TDS10T-VL. Type: Shielded.
Appearance: Cylindrical, 5.4 dia. × 18 mm.
Sensing distance: 1 mm.
Repeat accuracy: 1 μm.
Cable specification: With Protective Spiral Tube.
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-ddia ZX-TDS10T-VL. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening witth,
fine positioning to maximize variations ZX-TDS10T-VL.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit.
...More relevant models >>>>