8 pts, 1.2 A, 120 VACModel: Unit version 1.2.
NJ system: CPU Rack;Expansion Rack,
Not supported.
CJ1 system: CJ1 system, Expansion Backplane,
8 Units (per CPU Unit).
CP1H system: CP1H PLC, 2 Units.
NSJ system: Controller NSJ, Not supported;
Expansion Backplane, 8 Units.
New Controller Link Units,
Now with 4,000 Send Words CS1W-NC213 safety precautions.
The Controller Link is an FA,
network that can send and receive,
large amounts of data easily,
and at high speed CS1W-NC213
The Controller Link supports data,
links that enable sharing,
data between PLCs and computers,
and a message service that enables,
sending and receiving data whenever required.
Systems can be flexibly built by using Repeater,
Units to enable T-branches, long-distance wiring,
and converting part of the network to optical cable CS1W-NC213 safety precautions. Model: C200H-OD411.
No. of points: 8 pts.
Specifications: 1A, 12 to 48 VDC.Name: Compact Connectors.
Specifications: Inputs/Outputs; 2 input/2 output; PNP.
Bit slave of smallest class in industry,
Innovation in wiring for any type of machinery.
Available in 2 types: 2-point Bit Slave Unit,
and 4-point Bit Slave Unit CS1W-NC213 safety precautions.
Compact size for installation in limited space.
Save space and wiring since bit slave can be,
installed near I/O devices.
Industry first bit slave connectable with round,
cables which can be easily purchased at a lower price.
Connectable with flat cables, too for easy wiring.
Cables are selectable depending on applications. C500-OD I/O Unit Transistor Output 16 pts C500-OD217(3G2A5-OD217).
DC12-24V 1A.Unit type: CJ1 Special I/O Units.
Product name: Analog Input Unit.
I/O points: 8 inputs;
Signal range selection: 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 to 10 V, 4 to 20mA;
1/4,000(Settable to 1/8,000)*2 .
Conversion period: 1 ms/point,
(250 μs/point can also be set.)*2.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.2% of F. S. Current: ±0.4% of F.S.
External connecttion: Removable terminal block CS1W-NC213 Manual.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.42A; 24V, --.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Anaalog Input Units for converting analog input,
signals into binary data CS1W-NC213 Manual.
Analog Output Units for converting binary ,
data into analog output signals.