Unit type: CS1 Special I/O Units.
Connected ID System: V680 Series;
2 Heads.
External power supply : 24 VDC.
No. of unit numbers used: 2 unit number.
Current consumption: 5V, 0.32A; 26V, --;
External, 0.36A.
Communication Unit Dedicated for RFID,
V680 Allowing Direct Connection to,
OMRON PLC CJ/CS/NJ-series CP1E-NA20DT1-D USER'S MANUAL.
Communication unit for connecting RFID,
V680-series, which can be used around,
the world, directly to PLC CP1E-NA20DT1-D
Allows batch transfer of data up to 32 kbytes.Product name: E@@S type CPU Units with 14 I/O Points.
Specifications: Power Supply, 100 to 240 VAC; Inputs, 8;Outputs, 6;
Output type, Relay; Program capacity, 2K steps; memory Data capacity, 2K words.
External powersupply(24 VDC): -- CP1E-NA20DT1-D USER'S MANUAL.
Current consumption: 5 V, 0.16A; 24 V，0.07A.
Standards: CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection CP1E-NA20DT1-D USER'S MANUAL. CPU Unit: CP1L-L CPU Units with 14 Points.
Specifications: CPU type, Memory capacity: 5K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Power supply, DC power supply; Output method, Transistor output (sinking);
Inputs, 8; Output, 6.
Standards: UC1, N, L, CE.
High Performing Programmable Controller with Embedded Ethernet.
"CP1L-EM" and "CP1L-EL" has a standard-feature Ethernet port.
"CP1L-M" and "CP1L-L" has a standard-feature peripheral USB port.
Function blocks (FB) allow you to build up modular structure and,
programming of ladder diagrams. NO. OF I/O SLOTS: 11 SLOTSPower supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a measurement equipment or compoonents must be given to the ASCII unit or BASIC unit to write a communication program CP1E-NA20DT1-D Communications Commands Manual.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communicaations procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components CP1E-NA20DT1-D Communications Commands Manual.