Model : CV2000-CPU01-V1.
SFC / Ladder 2, 048 (with RAM62K words, the top internal link).Model: C500F-CPUA1-V1(3G2C3-CPUA1-V1).
C500F-CP CPU Programmable Controller C500F-CPUA1-V1.NO. OF I/O SLOTS: 5 SLOTSCV500-HD SYSMAC BUS PC Unit Hard Disk Unit 80MB hard disk CV500-HDD11.
CV500-HDD11: 80MB x 2.Model : CV500-CN232 OMRON CV500-CIF21.
Cable I / O connection.
20m cable length.C500-AD Special I/O Unit Analog Input C500-AD501 CV500-CIF21
Input: 16 pts.
Specification: 0~+5V, 0~+10V, -5~+5V
-10~+10V, 0~+20mA, -20~+20mA.NO. OF I/O SLOTS: 5 SLOTSModel: C500-BC031(3G2A5-BC031).
3 slots(3 linkable slots).
CV500-FH SYSMAC BUS PC Unit Floppy/Hard Disk Drive For 200 VAC CV500-FHD02-E.CV500-SL CPU Bus Unit for Com SYSMAC LINK Unit SYSMAC LINK Unit (coaxial) CV500-SLK21 OMRON CV500-CIF21. Feeding unit while the SYSMAC LINK Unit 2
If you need to.Model : C500-BP001.
Optional extension cable is necessary..C500-OA I/O Unit Triac Output 32 pts C500-OA225.
AC250V 1A.NO. OF I/O SLOTS: 5 SLOTSCV500-BS CPU Bus Unit BASIC Unit CV500-BSC11.
RS-232C: 2 ports, RS-422: 1 port.The initial configuration of the G language unit in the industry due to the use of G language,
Complex processing procedures do not need to be able to make the ladder diagram OMRON CV500-CIF21.
The realization of the first 1 axis simultaneous control of 4 axis simultaneous control in the industry is due to the multi task function,
Can be executed at the same time or the 2 axis simultaneous control of 4 axes, and then can achieve the 4 axis independent control, etc.
Up to 8 units can be installed CVM1 8 units can be installed 1 units, can control up to 32 axes.
Applicable to ABS encoder by standard,
Applicable to the ABS ttype (absolute output) encoder, so after the emergency stop, no need to search for the origin, etc CV500-CIF21. .
S curve also according to the standard configuration plus deceleration curve, in addition to the trapezoidal outside,
Also configured too suppress the mechanical vibration of the S shape curve CV500-CIF21.
Program login maximum of up to 100
G language can be programmed with the MC support software G