Size: 96 × 96 mm.
Control type: Position-proportional control (1 loop).
Control mode: Single-loop position-proportional control (See note.).
(1 open, 1 close) and 1 current (transfer) output.
Event inputs, None; Serial communications, Yes.
3-row LCD display for high visual clarity.
requiring high-speed response.
negative LCD display with a backlight.
possible with a single Controller.
Support Software (CX-Thermo version 4.0 or higher).
root calculation and broken-line approximation).
DeviceNet Communications.
Data setting and monitoring can be performed without special programming.
Type: controller with terminal blocks.
Size: 1/4DIN, 96 * 96 * 78mm.
Power supply voltage: AC100 ~ 240V.
Type of input: thermocouple or platinum resistance.
Alarm output: 3.
Control output: current output.
Heater disconnection: yes.
Install optional unit: have.
Best selling multi purpose thermostat is now more outstanding OMRON E5AR-PRQ4F-DRT.
Temperature controller is now available for analog input
E5AR-PRQ4F-DRT
A more rapid sampling rate 250ms.
Provide transfer output, can be simple output to the recorder.
The model is optional with the circuit breaking alarm (LBA) and the heater short circuit alarm (HS).
Simply set the 11 segment display.
Equipped with a manual output function.
New type of installation with communication Modbus OMRON E5AR-PRQ4F-DRT.
USB serial conversion cable optional. Size: 48 x 48mm.
Body: terminal type.
Type: control output 1 point type (power AC/DC24V).
Shell color: silver.
Control output: voltage output (SSR driver).
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
The failure detection function of the heater with the broken line and SSR: -.
Event input points: -.
Transfer output: - OMRON E5AR-PRQ4F-DRT.
Communication: -.
General thermostat new high performance (high resolution, high speed, high precision input) type products.
Support simple operation, preventive maintenance, using a new type of liquid crystal, visual angle, contrast to enhance.
High resolution 5 bit display / can display 0.01 degrees C (to achieve a small size of 48 x 48mm).
High speed sampling period 60ms.
All models (thermocouple /Pt/ analog input switching), 1 machines to support a variety of sensors.
Add PV/SV state display function, to see the state of the thermostat.
(automatic / manual, RUN/STOP, alarm), interactive display PV/SV.
By supporting software (CX-ThermoVer.4.0) to carry out a simple function (AND/OR logic and delay),
Be able to execute flexible contact output
Increase the control output ON/OFF number counting function, can predict the temperature controller internal relay faultOntology: terminal type, analog input type.
Type: control output 1 point type (power AC/DC24V).
Shell color: black.
Control output: relay output.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
The heater is used to break, SSR fault, heater over current detection function /ES1B power supply: single phase or three phase heater with detection function.
Event input points: -.
Transfer output: -.
Communication: RS-485.
48mm general thermostat has been upgraded & function / performance upgrade.
Indicates that the accuracy is increased and the preventive maintenance function is increaased,
Further performance improvement E5AR-PRQ4F-DRT.
E5CN-U (insert type) add analog input and current output type.
Add PV/SV status display function, convenient to check the state of the thermostat (automatic / manual, RUN/STOP, alarm),
Interactivve display PV/SV E5AR-PRQ4F-DRT.
Increase the number of control output ON/OFF counting function, can prevent the maintenance of temperature controller internal relay.