LK Automation Limited
Brand:
OMRON
H5CX-BWSD-N | OMRON Digital Timer H5CX-BWSD-N
OMRON H5CX-BWSD-N Manual And Instructions
H5CX-BWSD-N datasheetPDF datasheet
H5CX-BWSD-N INSTRUCTION MANUAL
H5CX-BWSD-N INSTRUCTION MANUAL
OMRON H5CX-BWSD-N Product information and technical parameters：
Brand: OMRON
Name: Digital Timer
Model: H5CX-BWSD-N
Type: H5CX-B series.
Time specifications: 0.01 to 9999.99 s, 1 s to 99 h 59 min 59 s,
0.1 to 99999.9 min, 0.1 to 99999.9 h.
Operating modes: A: Signal ON Delay I, F-1: Cumulative.
External connections: Screw terminals.
Input: Signal, Reset, Gate (NPN/PNP input).
Output: Transistor output (DPST).
Supply voltage: 12 to 24 VDC.
The Timer with the Shortest Body,
in the Industry.
...More relevant models >>>>
H5CX-BWSD-N datasheetPDF datasheet
H5CX-BWSD-N INSTRUCTION MANUAL
H5CX-BWSD-N INSTRUCTION MANUAL
OMRON H5CX-BWSD-N Product information and technical parameters：
Brand: OMRON
Name: Digital Timer
Model: H5CX-BWSD-N
Type: H5CX-B series.
Time specifications: 0.01 to 9999.99 s, 1 s to 99 h 59 min 59 s,
0.1 to 99999.9 min, 0.1 to 99999.9 h.
Operating modes: A: Signal ON Delay I, F-1: Cumulative.
External connections: Screw terminals.
Input: Signal, Reset, Gate (NPN/PNP input).
Output: Transistor output (DPST).
Supply voltage: 12 to 24 VDC.
The Timer with the Shortest Body,
in the Industry.
Input type: DC current input.
Output type: linear; voltage; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with OMRON H5CX-BWSD-N.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table H5CX-BWSD-N
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
DeviceNet typeCount input: AC/DC multi-voltage input(24 to 240 VAC/VDC) OMRON H5CX-BWSD-N.
Max. counting speed: 20 Hz.
Display: 7-segment LCD.
Model: Black body.
Eight-digits, counting range 0 to 99999999.
Dual input speed: 30 Hz ←→ 1 kHz,
(except for AC/DC multivoltage input models).
Digital Rotary Pulse Meter Capable of 50 kHz Measurements.
Visual confirmation of judgement results through display colors that switch,
between red and green OMRON H5CX-BWSD-N.
Measures High-speed Pulses at 50 kHz.
Provides high-speed pulse measurements up to 50 kHz of rotary encoder,
or ON/OFF pulse.
signals and can perform rotating measurement of high-speed rotating objects.
Note: No-voltage contacts of up to 30 Hz are supported.
Six Measurement Operations Including Rotation (rpm)/Circumferential,
Speed, Ratio, and Cumulative.
One Rotary Pulse Meter has 6 rotary pulse measurement functions to,
support a variety.
of pulse measurement applications. Select the best function for your,
application from the.
following: Rotation (rpm)/circumferential speed/instantaneous flowrate,
(value proportional to frequency), absolute ratio, error ratio, error,
flow rate ratio, and passing.
speed (valuee inversely proportional to frequency) H5CX-BWSD-N.
DeviceNet models added to the series. Control output: Time-limit SPDT and Instantaneous SPDT.
Supply voltage: 110 VAC (50/60 Hz).
Solid-state Timer with Single Time Range.
and Operating Mode.
Time range: H3BA-X8HA (0 H5CX-BWSD-N. 05 s to 12 h),
H3BA-X8HB (0.3 s to 30 h),
H3BA-X8HC (0.6 s to 60 h).
Operating mode: ON-delay only.
Pin type: 8-pin only.
Output type: linear; voltage; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with OMRON H5CX-BWSD-N.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table H5CX-BWSD-N
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
DeviceNet typeCount input: AC/DC multi-voltage input(24 to 240 VAC/VDC) OMRON H5CX-BWSD-N.
Max. counting speed: 20 Hz.
Display: 7-segment LCD.
Model: Black body.
Eight-digits, counting range 0 to 99999999.
Dual input speed: 30 Hz ←→ 1 kHz,
(except for AC/DC multivoltage input models).
Digital Rotary Pulse Meter Capable of 50 kHz Measurements.
Visual confirmation of judgement results through display colors that switch,
between red and green OMRON H5CX-BWSD-N.
Measures High-speed Pulses at 50 kHz.
Provides high-speed pulse measurements up to 50 kHz of rotary encoder,
or ON/OFF pulse.
signals and can perform rotating measurement of high-speed rotating objects.
Note: No-voltage contacts of up to 30 Hz are supported.
Six Measurement Operations Including Rotation (rpm)/Circumferential,
Speed, Ratio, and Cumulative.
One Rotary Pulse Meter has 6 rotary pulse measurement functions to,
support a variety.
of pulse measurement applications. Select the best function for your,
application from the.
following: Rotation (rpm)/circumferential speed/instantaneous flowrate,
(value proportional to frequency), absolute ratio, error ratio, error,
flow rate ratio, and passing.
speed (valuee inversely proportional to frequency) H5CX-BWSD-N.
DeviceNet models added to the series. Control output: Time-limit SPDT and Instantaneous SPDT.
Supply voltage: 110 VAC (50/60 Hz).
Solid-state Timer with Single Time Range.
and Operating Mode.
Time range: H3BA-X8HA (0 H5CX-BWSD-N. 05 s to 12 h),
H3BA-X8HB (0.3 s to 30 h),
H3BA-X8HC (0.6 s to 60 h).
Operating mode: ON-delay only.
Pin type: 8-pin only.
...More relevant models >>>>