LK Automation Limited LK Automation Limited
Brand: OMRON
Go Back >> Product Catalogues
K8AC-H21PC-FLK | OMRON Digital Heater Element Burnout Detector K8AC-H21PC-FLK
OMRON K8AC-H21PC-FLK Manual And Instructions
K8AC-H21PC-FLK datasheetPDF datasheet

OMRON K8AC-H21PC-FLK Product information and technical parameters:
Brand: OMRON
Name: Digital Heater Element Burnout Detector
Model: K8AC-H21PC-FLK
Power supply voltage: 100 to 240 VAC.
Heater control method: Phase control Cyclic control.
Input specifications: Two current inputs,
(for either single phase or threephase).
Output specifications: One relay output.
Communications output: RS-485.
Current input range: 0.200 to 2.200 A.
A high-precision Heater Element.
Burnout Detector compatible with a,
wide-range of heater control methods.
Push-in terminals reduce the workload.
Scaling.
NPN or PNP equivalent output.
Lineup includes models compatible with many heater control methods,
including ON/OFF control, phase control, and cyclic control.
High-precision heater burnout alarm with digital measurement.
Contributes to preventative maintenance.
If the gate function is disabled, the gate input can be used as an,
undercurrent/overcurrent relay or for motor or lamp loads.
Undercurrent detection values can be set separately for CT1 and CT2.
CE marking and cUL certified (K8AC-H2@@@).

Type: Side-view lens.
Spot: Spot dia.: 4 mm.
Cost Revolution Led by UV Curing.
System.
Minimal heat damage thanks to UV-LED irradiation.
New UV LEDs with much higher brightness mounted in heads.
Greater irradiation power to reduce bonding tact time.
Usage of LEDs that have a long lifetime of 40,000,
hours* drastically reduces running costs OMRON K8AC-H21PC-FLK.
Ultra compact body that is approximately 1/8th the size,
of a conventional lamp system K8AC-H21PC-FLK
Equipped with a color LCD that makes settings simple and reliable. Sensor type and wiring: 3-wire DC PNP/2-wire DC 1-4.
Actuator wiring: Actuator wiring 3-4.
No. of ports: 8.
No. of I/O: 8.
Simple Wiring of Sensor Actuators.
Greatly reduce wiring in combination with the Smartclick XS5 OMRON K8AC-H21PC-FLK.
Insert the connector and turn 1/8 of a turn to lock the connectors.
Higher rated current to enable output applications.
Use previous M12 screw connectors. Rated voltage: 230 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage.
Frequency: 50/60 Hz.
Rated current: 50 Hz, 0.060 A; 60 Hz, 0.050 A .
Rated input: 50 Hz, 10 W ; 60 Hz, 9 W .
Rated rotational speed: 50 Hz, 2700 r/min; 60 Hz, 3200 r/min OMRON K8AC-H21PC-FLK.
Maximum flow rate: 50 Hz, 0.8 m3/min; 60 Hz, 0.9 m3/min.
Maximum static pressure: 50 Hz, 42.1 Pa; 60 Hz, 58.8 Pa.
Noise: 50 Hz, 32 dB; 60 Hz, 36 dB.
Optimum Cooling with a Comprehensive.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bladed models,
(28 type) included in series.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certified safety standards depend on the,
product. Check the information given for available models of Axial fans and,
the information in CCharacteristics K8AC-H21PC-FLK. Capacity: 350W.
Output voltage: 5V.
Output current: 60A.
Low investment and high efficiency, shocked the market.
350W single group output switching power supply.
Protection type: short circuit / over current / over vooltage / over temperature K8AC-H21PC-FLK.
Forced air cooling with built-in DC fan.
PWM control and adjustment.
Cooling fan switch control.
Low cost, high reliability.


...More relevant models >>>>